Patio Door · PuroCima Series
PuroCima Patio Door
Custom vinyl sliding patio door. Full-view Low-E glass, reinforced track.
NFRC certified · NAFS lab tested · NFRC label on every unit
Vinyl sliding patio doors, explained.
Vinyl sliding patio doors from Puro Windows are NFRC-certified PuroCima vinyl units built to your sizes and supplied factory-direct to builders across Washington, Oregon and California. Best for patios, decks and rear elevations.
The PuroCima sliding patio door gives full-view Low-E glass on a reinforced track, with the same certified quality and finishes as the window lines, so a whole house can be specified from one supplier.
There are 8 certified glass packages that qualify for Washington, with U-factors from 0.26 to 0.30. Sizes are built to your openings.
Every order uses a certified glass package that meets the Washington State Energy Code (U-factor 0.30 or lower). Factory-direct, builders typically save around 35% on the window package; plan on three and a half to four months from order to site.
Inside this window
The hardware on this patio door
Patio Door: full specifications
Construction
| Type | Sliding patio door |
| Frame | 82 mm multi-chamber vinyl (uPVC), with an integral nailing fin |
| Reinforcement | Galvanized steel in the main chambers; aluminium in the meeting and lock rails |
| Corners | Heat-welded, so there is no joint for air or water |
| Vinyl | UV-resistant compound: no painting, rot or rust, coastal-safe |
Glass
| Build-up | Double pane, tempered safety glass with an argon gap |
| Coating | Low-E, with the slight tint Low-E glass has |
| Spacer | Spacer with desiccant, sealed unit |
| Safety | Tempered, marked TEMPERED GLASS in the corner |
Hardware
| Included | D-shape handle with a keyed lock |
| Rollers on an aluminium track | |
| Insect screen panel |
Weather and energy
| Seals | Multiple compression seals and wool-pile weatherstrip |
| Drainage | Pressure-equalized, with concealed weep slots |
| U-factor (NFRC) | 0.26 to 0.30, by glass option |
| Washington code | 8 certified glass options at U 0.30 or lower |
| Label | NFRC label on every unit |
Tested performance
| Rating | Class R-PG25, design pressure 25 psf (tested at 60 x 80 in) |
| Tests | Independent accredited lab, AAMA/WDMA/CSA 101/I.S.2/A440-22 (NAFS): air leakage, water penetration, wind load, forced entry and welded-corner strength. |
Ordering
| Sizes | Built to your sizes in inches; rough opening is frame size plus 1/2 in |
| Finishes | White, black, two-tone (black outside, white inside); custom colours on request |
| Grilles | Simulated or true divided lites, inside or between the glass |
| Lead time | About 50 working days of production, plus 4 to 5 weeks of freight |
| Service life | 30+ years with simple cleaning |
Yes. The patio door comes in the same finishes as the windows (white, black and two-tone, with custom colors on request), so the whole elevation matches.
Between 0.26 and 0.30, depending on the certified glass package. For each order we spec a package that meets the Washington State Energy Code requirement of 0.30 or lower.
Yes. It is NFRC certified and AAMA compliant, and every unit carries its NFRC label for your inspector.
Every unit is built to your sizes. Finishes are white, black and two-tone (black exterior, white interior), with custom colors on request.
About ten weeks of production plus four to five weeks of ocean freight: roughly three and a half to four months from a locked order to your job site.
Pricing depends on sizes, glass and quantity. Because we supply factory-direct, builders typically save around 35% on the window package compared with a local distributor. Send your schedule for a quote.
The rest of the range
Ready to price your windows?
Pricing patio door
for your project?
Send your sizes and quantities and we come straight back with a factory-direct number.